Basic Info.
After-sales Service
Install ,Commission,Training, Field Service ,
Lubrication Style
Oil Free or Lubricated
Cooling System
Air Cooled or Water Cooled
Cylinder Arrangement
Series Arrangement
Cylinder Position
Vertical or Horizontal
Structure Type
Closed Type
Compress Level
1-6 Stages Compression
Refrigerant Type
Hydrogen
Max Discharge Pressure
2175psi/15.0MPa
Specification
max flow rate: 2000m3/min
Product Description
Thanks to decades years of the rapid industry development in china ,the reciprocating technology is
propelled and our clients can benefit from the competitive price, and diverse range of standardized
compressor , highly quality compressed process gas is achieved including ,but not limited to :air ,
oxygen ,nitrogen ,hydrogen,natural gas ,mixed gas.
Structure
Continuously reciprocating piston movement drive the hydraulic oil ,thus which push metallic
diaphragm set to compress the Gaseous in the cylinder of compressor. Membrane compressor
consist of compression system and hydraulic lubrication system , also the two systems be
completely separated by a set of metal diaphragm plates base on the static seal.In view of the
special structure design of diaphragm compressor different from common piston compressor,
it is suitable for small flow,Compression of flammable, explosive, corrosive and high outlet
pressure gas.
Safety protection
When the diaphragm breaks, the compressor alarms and stops
When the discharge pressure exceed the rated value, the compressor alarms and stops
Optional
When the suction pressure is low , the compressor alarms and stops
When the lubricating oil pressure is low , the compressor alarms and stops
When the lubricating oil pressure is high , the compressor alarms and stops
When the cooling water pressure is low , the compressor alarms and stops
When the temperature of bearing bush is low than the rated value, the compressor alarms and stops.
When the temperature of bearing bush is high than the rated value , the compressor alarms and stops.
Specification
GV and GL Series
Diaphragm Compressor |
| Stroke | Model | Cooling
Water
(t/h) | Capacity
(Nm³/h) | Suction
Pressure
(Mpa) | Discharge
Pressure
(Mpa) | Size
(mm) | Weight
(t) | Moter
Power
(KW) |
| piston stroke 70mm | GV-8/8-160 | 0.5 | 8 | 0.8 | 16 | 1310x686x980 | 0.65 | 3 |
| GV-7/8-350 | 0.8 | 7 | 0.8 | 16 | 1300x610x920 | 0.8 | 4 |
| GV-15/5-160 | 0.8 | 15 | 0.5 | 16 | 1330x740x920 | 0.7 | 5.5 |
| GV-5/7-350 | 1 | 5 | 0.7 | 35 | 1400x845x1100 | 0.8 | 5.5 |
| GV-5/200-1 | 0.3 | 5 | 20 | 0.1 | 1520x800x1050 | 0.75 | 3 |
| GV-11/1-25 | 0.6 | 11 | 0.1 | 2.5 | 1500x780x1080 | 0.85 | 4 |
| GV-12/2-150 | 1 | 12 | 0.2 | 15 | 1600x776x1080 | 0.75 | 5.5 |
| GV-20/5-200 | 1.2 | 20 | 0.5 | 20 | 1500x780x1080 | 0.8 | 7.5 |
| Piston stroke 135mm | GV-20/3-200 | 1.2 | 20 | 0.3 | 20 | 2030x1125x1430 | 1.8 | 15 |
| GV-120/3.5-12 | 3.6 | 120 | 0.35 | 1.2 | 2030x1045x1700 | 2.2 | 22 |
| GV-50/5-210 | 2 | 50 | 0.5 | 21 | 1900x1130x1450 | 2 | 30 |
| GV-40/5-350 | 2 | 40 | 0.5 | 35 | 1900x1130x1450 | 2 | 30 |
| |
|
| piston stroke 70mm | GZ-10/4-16 | 0.5 | 10 | 0.4 | 1.6 | 1230x600x1100 | 0.5 | 2.2 |
| GZ-15/15-20 | 0.8 | 15 | 1.5 | 2 | 1000x560x1100 | 0.6 | 2.2 |
| GZ-8/50-350 | 0.5 | 8 | 5 | 35 | 1300x700x1200 | 0.75 | 5.5 |
| piston stroke 95mm | GZ-5/0.5-10 | 0.2 | 5 | 0.05 | 1 | 1400x740x1240 | 0.65 | 2.2 |
| GZ-30/5-10 | 0.7 | 30 | 0.5 | 1 | 1400x740x1330 | 0.75 | 3 |
| GZ-10/0.5-8 | 0.3 | 10 | 0.05 | 0.8 | 1450x800x1200 | 0.65 | 4 |
| GZ-15/5-30 | 0.4 | 15 | 0.5 | 3 | 1550x750x1330 | 0.85 | 4 |
| GZ-50/9.5-25 | 2 | 50 | 0.95 | 2.5 | 1400x740x1330 | 0.75 | 5.5 |
| GZ-20/17-200 | 1.2 | 20 | 1.7 | 20 | 1770x1030x1770 | 1.6 | 7.5 |
| GZ-30/1-13 | 0.8 | 30 | 0.1 | 1.3 | 1750x1070x1440 | 1.65 | 11 |
| GZ-100/13-20 | 1.2 | 100 | 1.3 | 2 | 1500x1000x1650 | 1.75 | 15 |
| | | | | | | | | |
| Model | Cooling Water
(t/h) | Capacity
(Nm³/h) | Suction
Pressure
(Mpa) | Discharge
Pressure
(Mpa) | Compressor Size
(mm) | Weight
(t) | Power
(kw) |
| GD-150/0.01-7 | 5 | 150 | 0.001 | 0.7 | 4200X3400X2000 | 13.8 | 45 |
| GD-320/0.5-13 | 5.5 | 320 | 0.05 | 1.3 | 4500X3800X2000 | 13.8 | 75 |
| GD-1450/11-25 | 7 | 1450 | 1.1 | 2.5 | 4200X3400X2000 | 13.8 | 75 |
| GD-1000/14-50 | 7 | 1000 | 1.4 | 5 | 4200X3400X2000 | 13.8 | 75 |
| GD-120/1-200 | 5.5 | 120 | 0.1 | 20 | 3500X2300X1500 | 8.5 | 55 |
| GD-300/5-150 | 6 | 300 | 0.5 | 15 | 3500X2300X1600 | 8.5 | 75 |
| GD-600/12-40 | 6 | 600 | 1.2 | 4 | 3500X2300X1550 | 8.5 | 55 |
| GD-300/6-50 | 5 | 300 | 0.6 | 5 | 3500X2300X1500 | 8.5 | 55 |
| GD-360/15-200 | 6 | 360 | 1.5 | 20 | 3500X2300X1350 | 8.5 | 75 |
| Model | Cooling Water
(t/h) | Capacity
(Nm³/h) | Suction
Pressure
(Mpa) | Discharge
Pressure
(Mpa) | Compressor Size
(mm) | Weight
(t) | Power
(kw) |
| GD-150/0.01-7 | 5 | 150 | 0.001 | 0.7 | 4200X3400X2000 | 13.8 | 45 |
| GD-320/0.5-13 | 5.5 | 320 | 0.05 | 1.3 | 4500X3800X2000 | 13.8 | 75 |
| GD-120/1-200 | 5.5 | 120 | 0.1 | 20 | 3500X2300X1500 | 8.5 | 55 |
| GD-300/5-150 | 6 | 300 | 0.5 | 15 | 3500X2300X1600 | 8.5 | 75 |
| GD-600/12-40 | 6 | 600 | 1.2 | 4 | 3500X2300X1550 | 8.5 | 55 |
Material lis
Name | Material | |
cylinder cover | 3Cr13 | Stainless steel |
membrane | 00Cr15Ni15 | |
gas pipes and flange | 304 | Stainless steel |
water pipes and cooler | 304 | Stainless steel |
oil pipes | 304 | Stainless steel |
chamber | 45 | steel |
crankshaft | 45 | steel |
connecting rod | 45 | steel |
piston rod | 40Cr | steel |
piston ring | MTCuMoCr-400 | |
cross head | MTCuMoCr-400 | |
piston | 45 | steel |
cross head pin | 20Cr | steel |
small head bushing of connecting rod | ZQSn10-1 | |
O ring for gas side | fluorine rubber | |
crankcase | HT200 | Cast iron |
| | |
| | |
| | |
Feature
--High purity of gas
--High discharge pressure
--High pressure ratio
--No gas leakage
--low noise and low power of motor
--Media gas can't include water.
--Max power be up to 160kw
--0.5mm thickness of diaphragm
--Splash and pressurized lubrication
--High purity
Good quality compressed gas can be obtained for medical and food industry.
No any dust particles will make the gas being pollutes in gas compression
membrane chamber due to the wear of sliding parts, which absolutely
ensures the gas before and after compression with the same purity.
Therefore, this kind of compressor is suitable for the pressurization
and transportation of high purity gas (such as electronic gas), breathing
gas, and hydrogen in fuel cell technology
Diaphragm compressor suitable for compressing high purity gas, flammable and explosive gas, toxic gas, oxygen, and so on.
--High discharge pressure
Wide range of discharge pressure, the max pressure can be up to 50MPa.
--High pressure ratio
During the compression the special structure brings good heat dissipation
and small clearance volume in chamber, so the high pressure ratio is easily
be achieveed.
-- No gas leakage
The gas compression chamber of compressor is sealed through a metal static seal.
we have kept a large stock of compressor and spare parts
For diaphragm compressor.low maintenance costs,just need to replace the diaphragm.
Excellent technical support
We provide a complete service from the first customer contact ,designing,manufaand
commissioning,as well as the excellent after sales support .
Address:
Zhengzhou, Henan, China
Business Type:
Manufacturer/Factory
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery
Company Introduction:
Our company focus on designing and manufacturing reciprocating gas compressor for various application as well as the compressor parts. Thanks to decades years of on the reciprocating technology, diverse range of standardized compressor can be offered, thus our client can benefit from the competitive price and high reliability, highly quality compressed process gas is achieved including, but not limited to: Air, oxygen, nitrogen, natural gas, hydrogen, carbon dioxide, mixed gas.
){kind=link}